PISTOL LOADS

kagiyama-san please stabilize my projectiles!!!

BACK TO MAIN

ALL UNITS OF MEASUREMENT USED ARE IMPERIAL - INCHES AND GRAINS
NAMES IN BOLD ARE OVERPRESSURE, NAMES IN ITALICS ARE UNTESTED

9mm LUGER

Test barrel - 5" CZ SP-01, 1:10 twist - 5 shot groups

Name Case OAL COAL Projectile Powder Charge Primer Brass Avg. Velocity SD Notes
Lehigh XTD Turbo Copslayer .754 +/-0.005 1.108 90gr Lehigh XTD Xtreme Defense
Ultra Solid Copper Monolithic
Fluid Dispersion Barrier Blind
Child Annihilator Domestic Terror
Lead-Free Ray Peat Approved
CFE Pistol (can use AutoComp) 6.1 gr CCI #500 SPP Once-fired 9mm NATO range brass, un-annealed, Sellier & Bellot preferred 1357 FPS 9.66 Noticeably less recoil over 115gr, actually pleasant to shoot out of a subcompact. Accuracy identical to FMJ 115gr. Did not need crimping.
Snoozetech 124gr JHP .754 +/-0.005 1.100 124gr JHP, Berry's Accurate #2 4.5gr CCI #500 SPP Once-fired 9mm NATO range brass, un-annealed, Sellier & Bellot preferred 1121 FPS (QL) (missing data
╥﹏╥)
These will jam every fucking time if you don't crimp them. Stopped loading due to 9mm bulk prices dropping.

7.62mm TOKAREV

Test barrel - 4.7" CZ 52, 1:9.45 twist? - 10 shot groups minimum

Name Case OAL COAL Projectile Powder Charge Primer Brass Avg. Velocity SD Notes
85gr Tok Rangeblaster 0.984 1.386 85gr FMJ PPU CFE Pistol 6.0 gr CCI #500 SPP Starline factory brass (missing data
╥﹏╥)
(missing data
╥﹏╥)
Didn't blow off my hands! Pleasant to shoot. Does not need crimping.

.45 ACP

Test barrel - 4.41" Heckle my Koch USP, 1:16 twist? - 10 shot groups minimum

Name Case OAL COAL Projectile Powder Charge Primer Brass Avg. Velocity SD Notes
Neverjam Surefire 230gr FTE (Failure to Expand) 0.900 1.230 230gr Bonded Hybrid HP Accurate #2 5.5gr CCI #300 LPP Once-fired range brass 815 FPS (quickload) (missing data
╥﹏╥)
FTF rate of ~40% when uncrimped, 0% when crimped. These projectiles suck, they require like ~875+ FPS to expand and that just won't happen with .45 ACP.
Got something comically slow like 730 fps out of my 3" Colt Defender.

MISC

Name Case OAL COAL Projectile Powder Charge Primer Brass Avg. Velocity SD Notes
Deagle Fuel 240gr .44 Win Mag 1.275 1.550 Hornady 240gr XTP Accurate #9 19.0 gr CCI Large Pistol Once-fired range brass, Herter's/mixed 1348 FPS (QL) (missing data
╥﹏╥)
Cartridge OAL shorter than SAAMI spec to assist with cycling and feeding in a semi-auto. Rounds crimped. Most jams with a Desert Eagle are due to grip issues, but over-length .44 WM rounds will cause problems as many are longer than spec would entail; not a problem for revolvers, generally, but definitely an issue with the deagle.
Maureen's .45 LC handloads 1.266 1.600 Lyman 452424 .45 Colt 255gr Lead Cast Semi-Wadcutter Hercules(Alliant) Bullseye 5.7 gr Western Staynless Non-Mercuric #7 (Winchester #7) Custom nickel-plated brass, orig. Winchester 895 FPS ~15 Intended to just barely be under the sound barrier. Primers and case necks sealed with nail polish (red).

Maureen’s .45LC 1894 Custom
-Winchester 1894 in .45 Long Colt
-Stock cut down to “mare’s leg” with screw-on wire stock like a KS-23, cheek riser made out of bent copper tube and clamped on; stock is short because Maureen is very petite (5’0”)
-PU scope and Russian mount directly bolted to frame, set slightly far back for better eye relief
-Barrel length cut down to 10 inches and threaded
-Maxim silencer surplused from US Army sniper stocks after end of WWI
-Magazine tube shortened to 6 rounds for reliable feeding and higher spring pressure
-Uses hand-cast Keith SWCs at 255 grains, clocks in at around 950 FPS at muzzle
-No major changes to internals other than polishing surfaces and greasing relevant parts
-Brass point target front sight added to newly shortened barrel, heightened slightly to account for suppressor
-Irons zeroed at 50 yards, scope has dope chart attached to laminated paper in Maureen’s purse but generally set to 100
-OAL without the stock should be around ~24 inches, with stock goes up to 30, suppressor removed (18 ish inches) means it fits in most large women’s shoulder bags
-Furniture replaced with dark-dyed Bakelite to prevent warping from humidity
-Spraypainted and clearcoated in black matte finish
-Around 8 lbs kitted out, but if used as a “pistol” without the stock or suppressor drops down to around 5-6 lbs